Osborn ATB Novoflex Honing Tools Honing Deburring Flexible

NovoFlex®

Osborn’s ATB™ NovoFlex™ is a self-centering tool that will conform to the bore surface providing a consistent, even surface finish over the life of the tool. Because of its round, abrasive beads fastened to the ends of flexible filaments, it will provide an “edge break” not possible with conventional honing stones.

About Novoflex®

Novoflex® is an extremely flexible tool that is used primarily for deburring and secondarily for honing. It is self-centering and can be used on hand-held machines as well as in CNC and NC machines, machining centers, and automatic machines. It can be clamped in tool spindles.

Regardless of the material grade of a component, Novoflex® produces a clean and controllable surface finish on edges and internal surfaces. The tool is extremely effective for deburring and rounding workpiece edges, in the infeed and outfeed of cylindrical bores, for internal intersections and grooves, as well as in bearing races.

You can create a plateau finish with Novoflex®. This so-called "cross-hatch pattern" is desirable in cylinder liners, for example. When the piston moves, the oil adheres better to the walls of the cylinder's inner surface due to the cross-grinding and thus ensures smooth and trouble-free running.

Where do I use 
Novoflex®?

Novoflex® deburring and honing tools are used, for example, in the automotive and aerospace industries. Possible applications are e.g. the production or machining of 

  • Engine cylinders, connecting rods, wheel brake cylinders, brake control cylinders
  • Bores on shafts and cranks
  • Pneumatic and hydraulic cylinders
  • Heat exchangers
  • Tubes and hoses

What should I pay attention to?

Novoflex® should always be used with an oversize compared to the bore of the workpiece. Therefore, always determine the bore diameter of the workpiece first.  In our technical product tables for Novoflex®, we always indicate the bore diameter of the workpiece with "W" in the first column. This makes it very easy for you to find the right item for your application.

Other points you should bear in mind:

  • The use of lubricants is always necessary
  • We recommend greasing Novoflex® with honing oil before use. Mineral oil, engine oil, water-soluble oil (viscosity 10W30), or cooling lubricant can be used as alternatives
  • On hydraulic brake cylinders, please use brake fluid instead
  • Honing time is approx. 20 - 40 sec.
  • Recommended speed for Novoflex-B brushes
    up to Ø 40 mm: 600 -1000 min / 60 -120 osc./min.
    from Ø 41 mm: 350 - 600 min / 60 -120 osc./min.
  • For deburring longitudinal and transverse bores, the processing time can be reduced
  • Clean the bore with hot water and detergent using Osborn nylon tube brushes
  • Lightly oil the bore after cleaning

NovoFlex®
Products.

Loading...
Product image for Internal Brushes – Novoflex - Small Diameter USIBIB028

Novoflex - Small Diameter

Osborn’s small diameter ATB™ Novoflex Tools are designed with round, abrasive beads fastened to the end of flexible nylon filaments sized to address smaller applications such as brake cylinders, hydraulics and valve guides. This self-centering tool will conform to the bore surface to provide a consistent, even surface finish over the life of the tool.

Loading...
Product image for Internal Brushes – Novoflex - Standard Duty USIBIB029

Novoflex - Standard Duty

Designed with round, abrasive beads fastened to the end of flexible nylon filaments, Osborn ATB™ Novoflex flexible honing tools are ideal for a variety of bore cleaning tasks. Tools create crosshatch pattern for improved oil retention and increased efficiency, and will even provide an edge break not possible with conventional honing stones.

Loading...
Product image for Internal Brushes – Novoflex - Heavy Duty USIBIB031

Novoflex - Heavy Duty

The longer brush length of Osborn’s heavy duty ATB™ Novoflex Tool tackles tough honing projects with efficiency. Silicon Carbide abrasive beads are fastened to durable nylon filaments to allow the tool to conform to the bore surface. Flexible filaments are engineered to provide the correct pressure to create an ideal hone over the life of the tool.

Loading...
© 2022 Osborn. All Rights Reserved
Loading...