Automated deburring in machining centres
ATB® disc and round brushes from OSBORN are primarily used for deburring, edge rounding and finishing. They are ideal for deburring edges on flat surfaces, stamped and fine-blanked parts, as well as precision, ground and lapped parts.
Long service life, short machining time, lower process costs
ATB® brushes are manufactured within tight tolerances and do not have to be run in. An interesting feature is the particularly even edge deburring, which does not change the shape of the workpiece. The brush fill is up to 4 times denser than with conventional (punched) brushes and is extremely dimensionally stable because the bristles are firmly cast in the disc and therefore cannot break out. This leads to increased service life and a shorter processing time of the workpiece. The user can thus significantly reduce his process costs.
Many diameters, fill materials and grit sizes
Osborn offers a wide range of ATB® disc and wheel brushes. The diameters range from 50 to 250 mm, whereas abrasive grits like aluminum oxide, silicon carbide, ceramics and diamond can be used (different grit sizes are available). The materials are temperature resistant and can be used in combination with cooling liquids. There are versions with full fill and segmented fill to vary the aggressiveness or flexibility of the brush. Optionally, a flexible support collar, which is guided around the fill material, can provide stability for longer filaments and higher speeds. Coolants and lubricants can be added. Their use is particularly recommended for higher speeds or very thin workpieces.
Use on machining centres
ATB® brushes can be adapted directly to the known tool holders due to the special mounting options. This means e.g. HSK-/SK-tool holders for combination mandrels, collets, surface chucks, etc. This enables the use on machining centers and modern CNC machines, as ATB® brushes can be used under the same conditions as cutting tools. Due to tight manufacturing tolerances, easy adaptation and high deburring performance, ATB® brushes can be used directly after the upstream machining processes and deburr the components directly on the machines. In addition, the brushes are suitable for deburring systems with planetary heads.
Products for
Automated deburring in machining centres.
ATB® disc brushes with maximum fill density, compatible with clamping fixture
Evolution
Can be used for deburring components made of the most diverse of materials, such as steel, aluminium and cast iron.
ATB® disc brushes with maximum fill density, for shell mill mount
Evolution
For direct mounting on shell mill holders without need of further clamping set / system.
ATB® disc brushes with maximum fill density, for tool holders
Evolution
For deburring sealing and contact surfaces. The application should take place on stationary machines. Use with cooling lubricant, water, oil is recommended.
ATB® disc brushes with maximum fill density, Turbo-line
Evolution
Brushes for use on continuous deburring systems with planetary heads.
Clamping fixtures for ATB® disc brushes with shank and clamping surface
Evolution
Clamping fixtures with shank-Ø 12 mm and clamping surface DIN 6535-HB. Compatible with ATB® disc brushes including a hexagonal mounting bore.
Tube brushes, abrasive filament
Superior
Tube brushes with abrasive trim, industrial quality, for internal finishing.
Micro-abrasive tube brushes, abrasive filament
Superior
Micro-abrasive tube brushes, industrial quality, for internal finishing.
Novoflex-B® honing and deburring tool, abrasive filament
Evolution
Novoflex-B honing tool, high-end quality, for internal finishing.
NOVOFLEX-H®, NOVOFIL®-WF Filament
Evolution
Trim material secured in spiral shape in 2-fold wire core.
ATB® wheel brush with full trim, shank adaption
Evolution
ATB® wheel brush with shank for direct adaption on several tool holders. Please ask our application technicians for open requests and general questions about the ATB® products.
ATB® end brush, shank adaption
Evolution
ATB® end brush with shank for direct adaption on several tool holders. Please ask our application technicians for open requests and general questions about the ATB® products.