Deburring
Mechanical processing (e.g. turning, milling, punching, lasering) produces edges, splinters or fraying on the workpiece due to the displacement of material. These are referred to as burrs. Steel, aluminum, castings and forgings are the main materials being deburred, but burrs also occur on wood or plastic parts.
About Deburring.
Mechanical processing (e.g. turning, milling, punching, lasering) produces edges, splinters or fraying on the workpiece due to the displacement of material. These are referred to as burrs. Steel, aluminum, castings and forgeings are the main materials being deburred, but burrs also occur on wood or plastic parts.
Which deburring methods exist?
There are different methods to remove burrs. These include brushing and grinding, vibratory grinding, but also thermal or electrochemical deburring and deburring using a high-pressure water jet.
Deburring can be performed with hand tools and power tools. In production environments, where high quantities are produced and process times and costs per part are important, workpieces are deburred automatically in machining centers and robot cells. In order to keep process times short, deburring is usually carried out in the same machining center in which the previou machining operation took place. Highly efficient brushes are used here, sometimes with the use of cooling lubricants.
To determine the appropriate deburring tool, the position of the burr and its accessibility, as well as the material of the workpiece and also the thickness of the burr must be analyzed.
What types of burr are there?
There are five different types of burrs. The difference is mainly defined by the size and by the respective machining process.
Burr class 1 - tinsel burr
It is usually caused by fine grinding. It is only a very small burr that is minimally connected to the workpiece. It is extremely easy to remove.
Burr class 2 - small burr base
It occurs during grinding and is larger than the tinsel burr. The burr is connected to the workpiece and must be removed mechanically.
Burr class 3 - large burr
It is also connected with workpiece. Its size is similar to class 2. However, it is shaft-edged. As a rule, burrs of this type are formed by milling.
Burr class 4 - burr with large foot
The foot of the burr is significantly larger than in class 3. Accordingly, the burr is firmly attached to the workpiece. It is created by processes such as slotting, broaching or turning.
Burr class 5 - displaced material
The cutting tool virtually pushes the material in front of it. Aggressive machining is necessary to remove such burrs.
Products for
Deburring.
Wheel brushes, crimped Osborn wire
Evolution
Crimped wheel brush, high-end quality, for mounting on stationary machines.
UNI-Master® wheel brushes, abrasive filament
Evolution
Wheel brush with abrasive trim, industrial quality, for mounting on deburring machines.
ATB® disc brushes with maximum fill density, compatible with clamping fixture
Evolution
Can be used for deburring components made of the most diverse of materials, such as steel, aluminium and cast iron.
Ringlock Wheel brushes, abrasive filament
Evolution
Ringlock wheel brush, industrial quality, with abrasive silicone carbide trim for attaching to high-speed machines.
Wheel brushes with shank, abrasive filament
Evolution
Ringlock wheel brush, industrial quality, with abrasive silicone carbide trim for attaching to high-speed machines.
Wheel brushes for table-deburring machines, abrasive filament
Superior
Wheel brush with abrasive trim, industrial quality, for mounting on deburring machines.
ATB® disc brushes with maximum fill density, for tool holders
Evolution
For deburring sealing and contact surfaces. The application should take place on stationary machines. Use with cooling lubricant, water, oil is recommended.