ATB®
ATB® is the abbreviation for Advanced Technology Brush System and forms our product range of brushes for automated deburring directly after the machining process.
ATB® - High-tech brushes for automated deburring.
ATB® brushes are precision tools that are largely responsible for the quality of the end products. They can be matched component-oriented to almost any material to be processed.
Our ATB® brushes are available with a wide range of abrasive bristles and wire trim in different grit sizes and filament/wire diameters.
ATB® brushes are designed for direct adaptation to tool holders, which means that they can be used in machining centers, CNC lathes & milling machines, robot cells, etc. The use of the brushes takes place downstream of the machining process.
The brushes are used downstream of the machining process and can be used with cooling lubricants, emulsions, or water without any problems.
water. This means that the machined workpieces can be deburred and finished directly, reliably, and reproducibly on the machine without reclamping.
Before/after comparison.
Before machining - clear burr formation on the edge. Milling grooves on the surface.
After machining - burrs were reliably removed and the edges rounded. The surface has an even, brushed look.
Advantages and
Application examples.
ATB® brushes have a 4 x higher fill density than the disc brushes produced in the conventional process (punched). As a result, the service life of the brushes is increased many times over, with higher throughput speeds and better and more efficient deburring results.
- Minimal process costs
- Firmly encapsulated abrasive bristles
- Extremely dense fill surface
- Enormously long tool life
- High dimensional stability and concentricity
- Use of cooling lubricant, emulsions, and water possible
- Plane fill surface
- Numerous, different fill materials e.g. abrasive bristles, wire materials, mixed fill material
- No reclamping of the workpiece after machining
Due to shorter machining times and very uniform edge rounding, our ATB® brushes are particularly suitable for deburring:
- Milled and turned parts
- Ground parts
- Sintered parts
- Stamped, nippled, and pressed parts
- Pneumatic and hydraulic parts
- Engine components, e.g. cylinder head, cylinder block, etc.
- Die-cast parts
- Valve plates
- Flat ground parts
- Toothed components
- Contact and sealing surfaces
- Finishing
Osborn
ATB® portfolio.
Tool holders & adaptability.
ATB® brushes are compatible with the following tool holders for direct adaptability for use in automated machining stations:
ATB®-Disc brushes
- Shell mill adaptors DIN 69882-3 / Universal arbors DIN 69882-2
- Planet head holder
- With Osborn clamping sets, other holders are possible such as Weldon holders or similar.
- Toolholders with HSK-taper shank DIN 69893
- ISO Taper-toolholders SK nach DIN 69871
- Holders for straight shank tools DIN 69882-4 (Weldon DIN 1835 B) etc.
ATB®-Wheel brushes
- Shell mill adaptors DIN 69882-3 / Universal arbors DIN 69882-2
- Through hole with and without keyway
- With Osborn clamping sets (shank holders)
- Toolholders with HSK-taper shank DIN 69893
- ISO Taper-toolholders SK nach DIN 69871
ATB®-End brushes
- shank holders
- Toolholders with HSK-taper shank DIN 69893
- ISO Taper-toolholders SK nach DIN 69871
- Holders for straight shank tools DIN 69882-4 (Weldon DIN 1835 B) etc.
Trim patterns & designs.
In order to achieve the best possible deburring and finishing results, different fill patterns and designs are required. Depending on the available product families of ATB® brushes, we offer the following fill types, among others:
ATB® disc brush
- full fill (max. fill density)
- partial fill (segmented)
- turboshape
- ring fill
- tapered/angled fill (under angle)
- spotted version
ATB® wheel brush
- full fill (max. fill density)
- partial fill (segmented)
ATB® End Brush
- full fill (max. fill density)
Determined by the material to be processed and the workpiece geometry, ATB® brushes can be equipped with various fill materials, from wire fill to abrasive bristles to mixed fill.
Technical feasibility & standard configurations.
In order to make the best possible use of the advantages of our ATB® product line, it is often necessary to exchange ideas with our product professionals. Often, application-specific brushing tools are worked out for the customer, which is developed taking into account the entire machining process.
We offer the following standard configurations (dimensions) for the three ATB® product families:
ATB® Disc brush
- Outer-Ø D: Ø40 to Ø250 mm
- Trim height T: 35 mm
- Body height KH: 13 mm
ATB® Wheel Brush
- Outer-Ø D: Ø100 to Ø355 mm
- Working width AB: 6 to 36 mm
- Body width KB: 10 to 40 mm
- Mounting hole ØB: 16 to 134 mm with and without keyways
ATB® End Brush
- Outer-Ø D: Ø16 to Ø40 mm
- Trim height T: 25 to 30 mm
- Shaft diameter: 6-8 mm
- Total length SL: 85 to 176 mm
ATB®
Products.
ATB Ringlock™ Brush
Constructed with high-quality nylon filament with choice of Silicon Carbide or Ceramic abrasive, Osborn’s small diameter ATB Ringlock™ Wheel Brushes are ideal for a variety of tasks using portable tools and drill presses. Silicon Carbide brushes tackle a variety of cleaning and deburring both ID and OD surfaces while Ceramic brushes are designed for more aggressive deburring applications. Brushes are expertly designed and tested to provide unmatched longevity.
ATB Master™ Wheel Brush
Featuring efficient Silicon Carbide or aggressive Ceramic abrasives and a wide face width, Osborn ATB Master™ Wheel Brushes are highly effective on both metallic and non-metallic materials. Cutting action does not require compound, eliminating the need to clean finished parts to save you time and money. Designed with premium Round Crimped nylon filaments to offer the industry’s longest brush life. Brushes can be used singly, or can be mounted in multiples for larger surfaces.
ATB™ End Brush w/ Bridle
The industry-best quality and performance of an Osborn ATB™ End Brush combined with a removable plastic bridle offers increased rigidity and aggression. Bridle keeps premium nylon filaments with choice of Silicon Carbide (for cleaning and finishing) or Ceramic (for tough deburring applications) abrasive from flaring for increased aggression.
ATB™ Cup Brush - Round Trim
Designed with a round trim and densely packed nylon filaments, this Osborn ATB™ Cup Brush offers optimal performance on irregular surfaces. Premium quality nylon filaments filled with Silicon Carbide abrasive to increase effectiveness and brush life.
ATB Situft™ Internal Brush
Osborn’s ATB Situft™ Internal Brushes feature premium-quality abrasive nylon filaments to provide efficient, aggressive abrasive action across a wide range of internal cleaning and finishing operations. Situft™ brushes should be used only with suitable holders.
ATB Helituf™ Internal Brush
Osborn ATB Helituf™ Internal Brushes are designed with high-quality nylon filament embedded with durable Silicon Carbide and unique helix design to provide efficient internal surface cleaning and deburring action. Helituf™ brushes should only be used with suitable holders and fully chucked.
ATB™ Rectangular Filament Internal Brush
Featuring rectangular nylon strips impregnated with tough Aluminum Oxide, Osborn’s ATB™ Rectangular Filament Internal Brush provides a highly efficient side-sweeping action across the surface. Filament shape applies approximately 18 times more abrasive contact than traditional round filaments. Aluminum Oxide ensures a superior finish and prolonged brush life.
ATB FasCut™ Wheel Brush - Flexible
Osborn’s flexible ATB Fascut™ Wheel Brushes feature long trim, flexible Round Crimped Silicon Carbide or Round Ceramic nylon abrasive filaments. Designed with moderate density, this brush is ideal for applications requiring a high degree of conformability. High-quality materials and construction offer the industry’s longest brush life.
ATB Uni-Lok® Max Density Disc Brush
Designed to tackle the most demanding of applications, Osborn’s ATB Uni-Lok® Max Density Disc Brushes deliver maximum aggression and reliable, uniform performance. Brushes feature max density, premium quality Round Crimped abrasive nylon filament, making them capable of processing large burrs on stainless steel and hardened alloys without altering the part’s dimension. Expertly designed and tested for minimal cycle time and exceptional brush life.
ATB FasCut™ Wheel Brush - Aggressive
Osborn’s aggressive ATB Fascut™ Wheel Brush is designed with short trim, premium nylon filament that is impregnated with abrasive material. Features high density, uniformly distributed Round Crimped Silicon Carbide or Round Ceramic filaments for increased aggression, minimum cycle time, and the industry’s longest brush life.